{"id":235,"date":"2021-06-09T13:10:10","date_gmt":"2021-06-09T11:10:10","guid":{"rendered":"https:\/\/www.sideria.com\/acciai-da-bonifica\/"},"modified":"2021-07-28T18:17:10","modified_gmt":"2021-07-28T16:17:10","slug":"steels-for-quench-and-temper","status":"publish","type":"page","link":"https:\/\/www.sideria.com\/en\/products\/steels-for-quench-and-temper\/","title":{"rendered":"Steel for quench and temper"},"content":{"rendered":"

[vc_row css=”.vc_custom_1623312041159{margin-bottom: 60px !important;}”][vc_column width=”2\/3″]

Steel for quench and temper<\/span><\/h1>[vc_column_text]Within the macro category of steel intended for quench and tempering, both structural alloy steels (suitable for high dynamic and static loads) and non-alloy steels (used for lower loads) are included.<\/p>\n

Hardness and ductility of quenched and tempered steel<\/strong><\/h2>\n

Steels for quench and tempering are ideal for hardening processes due to their chemical composition. They are also intended for heat treatment.<\/p>\n

As for the maximum hardness, it depends primarily on the carbon content that the steels have (this generally varies between 0.20% and 0.60%). The highest level of hardness is reached during the hardening phase, while during the following phase, tempering, the hardness is reduced again. In this way an optimal combination of ductility and, at the same time, hardness is obtained.<\/p>\n

The materials of alloyed tempering steel<\/strong><\/h2>\n

To obtain the desired properties, alloyed tempering steels also have:<\/p>\n